Brewery Hardware Discussions on Home Brew Forums

Terrible video, but dayamm. Started by Thym

I always liked the BIAB, and they nailed it. https://www.youtube.com/watch?v=ZPysPl7X-RU Introducing our new Brew-In-A-Basket (BIAB) systems. A complete 10 Gallon 240 volt ...

6 comments Most recent by JayrizzleOctober 2016Brewery Hardware

Different carb levels different taps? Started by C_B

I have a kegerator that currently holds 4 cornies. Ima set it up on a platform in the basement and ...

1 Like 5 comments Most recent by FuzzyDecember 2015Brewery Hardware

Beer gas? Started by C_B This discussion was created from places.

36 comments Most recent by C_BNovember 2015Brewery Hardware

SS Keggle bulkheads - Welded, weldless or soldered? Started by C_B

Currently the kettle has a sight gauge/thermometer bulkhead and an bulkhead for the outlet valve. I think I'm going to ...

1 Like 5 comments Most recent by ThymNovember 2015Brewery Hardware

Direct fired single vessel BIAB. Started by C_B

I've proven repeatedly that I can't/won't brew outside like I'm set up now. I've been thinking about RIMS, all electric, ...

6 Likes 95 comments Most recent by CurlyFatNovember 2015Brewery Hardware

New keezer needed Started by frydogbrews

so, my keezer broke. I think it has been broken for a few weeks, but that's besides the point. ...

19 comments Most recent by frydogbrewsNovember 2013Brewery Hardware

thermometer suggestions Started by Fuzzy

After the last couple of brews, I'm not entirely sure I trust the thermometer I use in the mash. I ...

1 Like 16 comments Most recent by ThymOctober 2013Brewery Hardware

Pump cavitation help. Started by C_B

So here's a pic of my pump configuration right at the moment. I have QDs to hook up and get ...

47 comments Most recent by ThymAugust 2013Brewery Hardware

Corona grain mill "build" Started by C_B Here's the mill naked.

28 comments Most recent by ThymApril 2013Brewery Hardware

Keg pressure relief valve not sealing. Started by C_B

I just added dry hops to a keg yesterday using Azscoob's hanging thread method. Worked like a champ. But now ...

1 Like 22 comments Most recent by frydogbrewsMarch 2013Brewery Hardware

1" NPS Locknut Kettle Mounting Started by jeepinjeepin

I'm just spitballing here. I want a solid connection between my element mounts and my kettles. I did not want ...

55 comments Most recent by ThymMarch 2013Brewery Hardware

brew tech development Started by Fuzzy This discussion was created from comments split

147 comments Most recent by ThymMarch 2013Brewery Hardware

Filtering beer Started by Fuzzy

I have one of those water line filters that I've re-purposed for filtering beer. I've attached qd's so that I ...

12 comments Most recent by FuzzyMarch 2013Brewery Hardware

Tips on cleaning an erlenmeyer flask? Started by jlw I was going to use my carboy brush. Any other tips?

17 comments Most recent by ceanntFebruary 2013Brewery Hardware

Erlenmeyer Flask Direct on the Burner? Started by jlw I can put the flask direct on the burner? Correct?

7 Likes 24 comments Most recent by jlwFebruary 2013Brewery Hardware

Blow off tubes Started by GryllE

No rush, just wondering if anyone has any thoughts/ideas... I have been brewing steadily for about 6 years, and 7 ...

1 Like 22 comments Most recent by ceanntFebruary 2013Brewery Hardware

Erlenmeyer Flask Sizing Started by jlw

I'm going to finally break down and buy a flask. Up until this point I have been using a big ...

36 comments Most recent by jeepinjeepinFebruary 2013Brewery Hardware

stir-plates a plenty Started by Thym

A new world on wonder and whinsey has arrived at my house. I can't wait to get it chuggin on a ...

9 comments Most recent by ThymFebruary 2013Brewery Hardware

Going all grain with sanke kegs Started by Benvarine

I'm looking for advice. I intend to start brewing all grain. I have collected three sanke kegs and will use ...

15 comments Most recent by ThymJanuary 2013Brewery Hardware

15 gallon or 20 gallon BK? Started by jlw

I was surfing around ebay and discovered that a 20 gal BK isn't really that much more expensive than a ...

19 comments Most recent by ThymDecember 2012Brewery Hardware

German kegs, sliders? Started by Benvarine

I found a keg on CL pretty reasonable. He says it is a German brewery keg. I searched online, I ...

1 Like 21 comments Most recent by LothosApril 2012Brewery Hardware

What type of keg do I use? Started by Benvarine

I want to start kegging. Where do I start? What type of keg does everyone recommend? I would ...

Answered 27 comments Most recent by C_BMarch 2012Brewery Hardware